12:40 p.m.
Hi all,
First time posting on the mailing list. Please let me know if I'm
doing something wrong :)
I recently installed emacs/emacspeak on my m1 macbook air using
the method outlined below:
brew tap d12frosted/emacs-plus
brew install emacs-plus@28 --with-no-titlebar
then unpacked the latest emacspeak tar.bz2 from the website and
ran
make config
make
Then added to init.el
(load-file "~/.emacs.d/emacspeak/lisp/emacspeak-setup.el")
(load-file "~/.emacs.d/emacspeak/lisp/mac-voices.el")
(dtk-set-rate 500 t)
(setq emacspeak-play-program "/opt/homebrew/bin/play") ;;was nill
without this being set manually
This setup allows me to use the function
emacspeak-play-auditory-icon to hear the icons. but whenever I do
emacspeak-sounds-select-theme and enter pan-chimes theme's folder
this doesn't make the theme work as expected. No errors just
nothing.
can anybody let me know what I'm doing wrong. I suspect that I'm
loading the themes in wrong somehow or I haven't got something
set that I need to. But I can't figure it out.
Best
Jimmy
4:24 p.m.
Its my understanding that mplayer does not work on an m1 mac, I think
this is your problem, but I don't know a solution.
On Thu, 09 Dec 2021 07:40:40 -0500,
Jimmy B via Emacspeak wrote:
Hi all,
First time posting on the mailing list. Please let me know if I'm
doing something wrong :)
I recently installed emacs/emacspeak on my m1 macbook air using
the method outlined below:
brew tap d12frosted/emacs-plus
brew install emacs-plus@28 --with-no-titlebar
then unpacked the latest emacspeak tar.bz2 from the website and
ran
make config
make
Then added to init.el (load-file
"~/.emacs.d/emacspeak/lisp/emacspeak-setup.el")
(load-file "~/.emacs.d/emacspeak/lisp/mac-voices.el")
(dtk-set-rate 500 t)
(setq emacspeak-play-program "/opt/homebrew/bin/play") ;;was nill
without this being set manually
This setup allows me to use the function
emacspeak-play-auditory-icon to hear the icons. but whenever I do
emacspeak-sounds-select-theme and enter pan-chimes theme's folder
this doesn't make the theme work as expected. No errors just
nothing.
can anybody let me know what I'm doing wrong. I suspect that I'm
loading the themes in wrong somehow or I haven't got something
set that I need to. But I can't figure it out.
Best
Jimmy
_______________________________________________
Emacspeak mailing list -- emacspeak(a)emacspeak.org
To unsubscribe send an email to emacspeak-leave(a)emacspeak.org
--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?
John Covici wb2una
covici(a)ccs.covici.com
4:43 p.m.
As far as I was aware, mplayer is only used to play the startup
sound in emacspeak(I could be mistaken but I thought I'd read this
in the previous arm mac thread).
so I don't think this is my issue.
John Covici <covici(a)ccs.covici.com> writes:
Its my understanding that mplayer does not work on an m1 mac, I
think
this is your problem, but I don't know a solution.
On Thu, 09 Dec 2021 07:40:40 -0500,
Jimmy B via Emacspeak wrote:
>
> Hi all,
> First time posting on the mailing list. Please let me know if
> I'm
> doing something wrong :)
> I recently installed emacs/emacspeak on my m1 macbook air using
> the method outlined below:
> brew tap d12frosted/emacs-plus
> brew install emacs-plus@28 --with-no-titlebar
>
> then unpacked the latest emacspeak tar.bz2 from the website and
> ran
>
> make config
> make
> Then added to init.el (load-file
> "~/.emacs.d/emacspeak/lisp/emacspeak-setup.el")
> (load-file "~/.emacs.d/emacspeak/lisp/mac-voices.el")
> (dtk-set-rate 500 t)
> (setq emacspeak-play-program "/opt/homebrew/bin/play") ;;was
> nill
> without this being set manually
> This setup allows me to use the function
> emacspeak-play-auditory-icon to hear the icons. but whenever I
> do
> emacspeak-sounds-select-theme and enter pan-chimes theme's
> folder
> this doesn't make the theme work as expected. No errors just
> nothing.
> can anybody let me know what I'm doing wrong. I suspect that
> I'm
> loading the themes in wrong somehow or I haven't got something
> set that I need to. But I can't figure it out.
> Best
>
> Jimmy
> _______________________________________________
> Emacspeak mailing list -- emacspeak(a)emacspeak.org
> To unsubscribe send an email to emacspeak-leave(a)emacspeak.org
7:24 p.m.
Sorry for all the emails! Here is an update on my issue that might
give more information.
the default value of emacspeak-auditory-icon-function is
emacspeak-serve-auditory-icon on my system. When I change this
value to emacspeak-play-auditory-icon, all my themes and icons
work fine.
So I think my issue is either in emacspeak-serve-auditory-icon or
in something it interacts with.
I'm not able to track the issue down further than this but maybe
someone on here might point me in the right direction.
Thank you
Jimmy
Jimmy B <jimmy(a)bryden.im> writes:
Hi all,
First time posting on the mailing list. Please let me know if
I'm
doing something wrong :)
I recently installed emacs/emacspeak on my m1 macbook air using
the
method outlined below:
brew tap d12frosted/emacs-plus
brew install emacs-plus@28 --with-no-titlebar
then unpacked the latest emacspeak tar.bz2 from the website and
ran
make config
make
Then added to init.el (load-file
"~/.emacs.d/emacspeak/lisp/emacspeak-setup.el")
(load-file "~/.emacs.d/emacspeak/lisp/mac-voices.el")
(dtk-set-rate 500 t)
(setq emacspeak-play-program "/opt/homebrew/bin/play") ;;was
nill
without this being set manually
This setup allows me to use the function
emacspeak-play-auditory-icon
to hear the icons. but whenever I do
emacspeak-sounds-select-theme and
enter pan-chimes theme's folder this doesn't make the theme work
as
expected. No errors just nothing.
can anybody let me know what I'm doing wrong. I suspect that I'm
loading the themes in wrong somehow or I haven't got something
set that I need to. But I can't figure it out.
Best
Jimmy
3:18 a.m.
Hi,
The behaviour you're getting with emacspeak-auditory-icon-function is quite similar to
what I observed in a different environment (in Emacspeak on Debian on UserLAnd on
Android). In my case, the solution was as simple as installing alsa-utils, but I'm
not at all familiar with macOS, so I don't know if that will help you at all.
https://mail.emacspeak.org/hyperkitty/list/emacspeak@emacspeak.org/messag...
All the best,
Tim
<><
On 10 December 2021 8:24:34 am NZDT, Jimmy B via Emacspeak <emacspeak(a)emacspeak.org>
wrote:
Sorry for all the emails! Here is an update on my issue that might
give more information.
the default value of emacspeak-auditory-icon-function is
emacspeak-serve-auditory-icon on my system. When I change this
value to emacspeak-play-auditory-icon, all my themes and icons
work fine.
So I think my issue is either in emacspeak-serve-auditory-icon or
in something it interacts with.
I'm not able to track the issue down further than this but maybe
someone on here might point me in the right direction.
Thank you
Jimmy
Jimmy B <jimmy(a)bryden.im> writes:
> Hi all,
> First time posting on the mailing list. Please let me know if
> I'm
> doing something wrong :)
>
> I recently installed emacs/emacspeak on my m1 macbook air using
> the
> method outlined below:
> brew tap d12frosted/emacs-plus
> brew install emacs-plus@28 --with-no-titlebar
>
> then unpacked the latest emacspeak tar.bz2 from the website and
> ran
>
> make config
> make
> Then added to init.el (load-file
> "~/.emacs.d/emacspeak/lisp/emacspeak-setup.el")
> (load-file "~/.emacs.d/emacspeak/lisp/mac-voices.el")
> (dtk-set-rate 500 t)
> (setq emacspeak-play-program "/opt/homebrew/bin/play") ;;was
> nill
> without this being set manually
>
> This setup allows me to use the function
> emacspeak-play-auditory-icon
> to hear the icons. but whenever I do
> emacspeak-sounds-select-theme and
> enter pan-chimes theme's folder this doesn't make the theme work
> as
> expected. No errors just nothing.
>
> can anybody let me know what I'm doing wrong. I suspect that I'm
> loading the themes in wrong somehow or I haven't got something
> set that I need to. But I can't figure it out.
> Best
>
> Jimmy
_______________________________________________
Emacspeak mailing list -- emacspeak(a)emacspeak.org
To unsubscribe send an email to emacspeak-leave(a)emacspeak.org
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
3:22 a.m.
New subject: auditory icon themes not working on m1 mac
On Sat, 11 Dec 2021 at 14:18, Tim Makarios via Emacspeak <
emacspeak(a)emacspeak.org> wrote:
Hi,
The behaviour you're getting with emacspeak-auditory-icon-function is
quite similar to what I observed in a different environment (in Emacspeak
on Debian on UserLAnd on Android). In my case, the solution was as simple
as installing alsa-utils, but I'm not at all familiar with macOS, so I
don't know if that will help you at all.
https://mail.emacspeak.org/hyperkitty/list/emacspeak@emacspeak.org/messag...
All the best,
Tim
<><
On 10 December 2021 8:24:34 am NZDT, Jimmy B via Emacspeak <
emacspeak(a)emacspeak.org> wrote:
>
> Sorry for all the emails! Here is an update on my issue that might
> give more information.
>
> the default value of emacspeak-auditory-icon-function is
> emacspeak-serve-auditory-icon on my system. When I change this
> value to emacspeak-play-auditory-icon, all my themes and icons
> work fine.
>
> So I think my issue is either in emacspeak-serve-auditory-icon or
> in something it interacts with.
>
> I'm not able to track the issue down further than this but maybe
> someone on here might point me in the right direction.
>
> Thank you
>
> Jimmy
> Jimmy B <jimmy(a)bryden.im> writes:
>
> Hi all,
>> First time posting on the mailing list. Please let me know if
>> I'm
>> doing something wrong :)
>>
>> I recently installed emacs/emacspeak on my m1 macbook air using
>> the
>> method outlined below:
>> brew tap d12frosted/emacs-plus
>> brew install emacs-plus@28 --with-no-titlebar
>>
>> then unpacked the latest emacspeak tar.bz2 from the website and
>> ran
>>
>> make config
>> make
>> Then added to init.el (load-file
>> "~/.emacs.d/emacspeak/lisp/emacspeak-setup.el")
>> (load-file "~/.emacs.d/emacspeak/lisp/mac-voices.el")
>> (dtk-set-rate 500 t)
>> (setq emacspeak-play-program "/opt/homebrew/bin/play") ;;was
>> nill
>> without this being set manually
>>
>> This setup allows me to use the function
>> emacspeak-play-auditory-icon
>> to hear the icons. but whenever I do
>> emacspeak-sounds-select-theme and
>> enter pan-chimes theme's folder this doesn't make the theme work
>> as
>> expected. No errors just nothing.
>>
>> can anybody let me know what I'm doing wrong. I suspect that I'm
>> loading the themes in wrong somehow or I haven't got something
>> set that I need to. But I can't figure it out.
>> Best
>>
>> Jimmy
>>
> ------------------------------
> Emacspeak mailing list -- emacspeak(a)emacspeak.org
> To unsubscribe send an email to emacspeak-leave(a)emacspeak.org
>
> --
Sent from my Android device with K-9 Mail. Please excuse my brevity.
_______________________________________________
Emacspeak mailing list -- emacspeak(a)emacspeak.org
To unsubscribe send an email to emacspeak-leave(a)emacspeak.org
I've had this issue too on a 2017 model mac since I installed emacspeak
over a year ago, auditory icons work fine on my raspberrypi however.
Also new line and backspace sounds work on my Mac but not many others
3:21 p.m.
New subject: auditory icon themes not working on m1 mac
I’ve managed to make it work on my Mac. My issue was exactly as you’ve described on your
2017 Mac.
If I add
(Sets emacspeak-auditory-icon-function ‘emacspeak-play-auditory-icon)
In init.el
It works the same as it does on my arch machine. I’ve been using this fix for a few days
and haven’t noticed any issues.
Maybe this will work on your 2017 Mac too and it’s not an m1 issue.
Best
Jimmy
On 11 Dec 2021, at 03:22, Tiresias
<isaac.m.j.s.leonard(a)gmail.com> wrote:
On Sat, 11 Dec 2021 at 14:18, Tim Makarios via Emacspeak <emacspeak(a)emacspeak.org
<mailto:emacspeak@emacspeak.org>> wrote:
Hi,
The behaviour you're getting with emacspeak-auditory-icon-function is quite similar
to what I observed in a different environment (in Emacspeak on Debian on UserLAnd on
Android). In my case, the solution was as simple as installing alsa-utils, but I'm not
at all familiar with macOS, so I don't know if that will help you at all.
https://mail.emacspeak.org/hyperkitty/list/emacspeak@emacspeak.org/messag...
<https://mail.emacspeak.org/hyperkitty/list/emacspeak@emacspeak.org/messag...
All the best,
Tim
<><
On 10 December 2021 8:24:34 am NZDT, Jimmy B via Emacspeak <emacspeak(a)emacspeak.org
<mailto:emacspeak@emacspeak.org>> wrote:
Sorry for all the emails! Here is an update on my issue that might
give more information.
the default value of emacspeak-auditory-icon-function is
emacspeak-serve-auditory-icon on my system. When I change this
value to emacspeak-play-auditory-icon, all my themes and icons
work fine.
So I think my issue is either in emacspeak-serve-auditory-icon or
in something it interacts with.
I'm not able to track the issue down further than this but maybe
someone on here might point me in the right direction.
Thank you
Jimmy
Jimmy B <jimmy(a)bryden.im <mailto:jimmy@bryden.im>> writes:
Hi all,
First time posting on the mailing list. Please let me know if
I'm
doing something wrong :)
I recently installed emacs/emacspeak on my m1 macbook air using
the
method outlined below:
brew tap d12frosted/emacs-plus
brew install emacs-plus@28 --with-no-titlebar
then unpacked the latest emacspeak tar.bz2 from the website and
ran
make config
make
Then added to init.el (load-file
"~/.emacs.d/emacspeak/lisp/emacspeak-setup.el")
(load-file "~/.emacs.d/emacspeak/lisp/mac-voices.el")
(dtk-set-rate 500 t)
(setq emacspeak-play-program "/opt/homebrew/bin/play") ;;was
nill
without this being set manually
This setup allows me to use the function
emacspeak-play-auditory-icon
to hear the icons. but whenever I do
emacspeak-sounds-select-theme and
enter pan-chimes theme's folder this doesn't make the theme work
as
expected. No errors just nothing.
can anybody let me know what I'm doing wrong. I suspect that I'm
loading the themes in wrong somehow or I haven't got something
set that I need to. But I can't figure it out.
Best
Jimmy
Emacspeak mailing list -- emacspeak(a)emacspeak.org <mailto:emacspeak@emacspeak.org>
To unsubscribe send an email to emacspeak-leave(a)emacspeak.org
<mailto:emacspeak-leave@emacspeak.org>
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
_______________________________________________
Emacspeak mailing list -- emacspeak(a)emacspeak.org <mailto:emacspeak@emacspeak.org>
To unsubscribe send an email to emacspeak-leave(a)emacspeak.org
<mailto:emacspeak-leave@emacspeak.org>
I've had this issue too on a 2017 model mac since I installed emacspeak over a year
ago, auditory icons work fine on my raspberrypi however.
Also new line and backspace sounds work on my Mac but not many others
10:33 a.m.
New subject: auditory icon themes not working on m1 mac
On a 2017 Mac I got it to work with:
(setq emacspeak-auditory-icon-function 'emacspeak-queue-auditory-icon)
Emacs now sounds completely ridiculous, this is great but also annoying lol.
jimmy B <jimmy(a)bryden.im> writes:
I’ve managed to make it work on my Mac. My issue was exactly as
you’ve described on your 2017 Mac.
If I add
(Sets emacspeak-auditory-icon-function ‘emacspeak-play-auditory-icon)
In init.el
It works the same as it does on my arch machine. I’ve been using this fix for a few days
and haven’t noticed any issues.
Maybe this will work on your 2017 Mac too and it’s not an m1 issue.
Best
Jimmy
On 11 Dec 2021, at 03:22, Tiresias <isaac.m.j.s.leonard(a)gmail.com> wrote:
On Sat, 11 Dec 2021 at 14:18, Tim Makarios via Emacspeak <emacspeak(a)emacspeak.org>
wrote:
Hi,
The behaviour you're getting with emacspeak-auditory-icon-function is quite similar
to what I observed in a different environment (in Emacspeak on Debian on UserLAnd on
Android). In my case, the solution was as simple as installing alsa-utils, but I'm not
at all familiar with macOS, so I don't know if that will help you at all.
https://mail.emacspeak.org/hyperkitty/list/emacspeak@emacspeak.org/messag...
All the best,
Tim
<><
On 10 December 2021 8:24:34 am NZDT, Jimmy B via Emacspeak
<emacspeak(a)emacspeak.org> wrote:
Sorry for all the emails! Here is an update on my issue that might
give more information.
the default value of emacspeak-auditory-icon-function is
emacspeak-serve-auditory-icon on my system. When I change this
value to emacspeak-play-auditory-icon, all my themes and icons
work fine.
So I think my issue is either in emacspeak-serve-auditory-icon or
in something it interacts with.
I'm not able to track the issue down further than this but maybe
someone on here might point me in the right direction.
Thank you
Jimmy
Jimmy B <jimmy(a)bryden.im> writes:
Hi all,
First time posting on the mailing list. Please let me know if
I'm
doing something wrong :)
I recently installed emacs/emacspeak on my m1 macbook air using
the
method outlined below:
brew tap d12frosted/emacs-plus
brew install emacs-plus@28 --with-no-titlebar
then unpacked the latest emacspeak tar.bz2 from the website and
ran
make config
make
Then added to init.el (load-file
"~/.emacs.d/emacspeak/lisp/emacspeak-setup.el")
(load-file "~/.emacs.d/emacspeak/lisp/mac-voices.el")
(dtk-set-rate 500 t)
(setq emacspeak-play-program "/opt/homebrew/bin/play") ;;was
nill
without this being set manually
This setup allows me to use the function
emacspeak-play-auditory-icon
to hear the icons. but whenever I do
emacspeak-sounds-select-theme and
enter pan-chimes theme's folder this doesn't make the theme work
as
expected. No errors just nothing.
can anybody let me know what I'm doing wrong. I suspect that I'm
loading the themes in wrong somehow or I haven't got something
set that I need to. But I can't figure it out.
Best
Jimmy
------------------------------------------------------------------------------
Emacspeak mailing list -- emacspeak(a)emacspeak.org
To unsubscribe send an email to emacspeak-leave(a)emacspeak.org
--
Best regards Isaac
533
days inactive
536
days old
7 comments
6 participants
participants (6)
-
Isaac Leonard -
jimmy B -
Jimmy B
-
John Covici -
Tim Makarios -
Tiresias